Techno-holics

It’s a nice concept. I can definitely build a bot ...

2011-11-17T14:35:47.207-08:00

It’s a nice concept. I can definitely build a bot that can navigate a course. I can build a dumbot that just sits there waiting for instructions. The problem is that It would take forever to figure out how to make the first one transmit to the second. Secondly… unless you are footing the bill for the xbee wireless shields and receiver for the pc along with 2 arduinos and 2 motor control boards, I wont be able to produce much more than a matchbox car.

yeah the sketch would great to share.

2011-11-04T05:12:24.334-07:00

yeah the sketch would great to share.

Just use a project box with two prongs. Did it in ...

2011-10-23T20:22:27.849-07:00

Just use a project box with two prongs. Did it in high school--less complex and easier to conceal.

Where is the video showing how it works on people?...

2011-10-22T08:49:37.440-07:00

Where is the video showing how it works on people? You need sustained power not just a single arc.

I would love to try and make these. Are there more...

2011-10-21T14:33:17.516-07:00

I would love to try and make these. Are there more detailed instructions for us less tech savvy? If not could we possibly get a set? That would be amazing!

@Ett Well an internet speed connection is given i...

2010-10-25T04:35:41.704-07:00

@Ett

Well an internet speed connection is given in bps and not Bps, therefore having a 40 Gbps connection means a lot. Download speed is in Bps.

1 Bps= 8 bps

Can you share the arduino sketch?

2010-10-13T06:21:53.883-07:00

Can you share the arduino sketch?

Trossen has a disclaimer at the bottom of their pa...

2010-03-26T01:11:20.846-07:00

Trossen has a disclaimer at the bottom of their page for the EM4102 ampoules saying that they're not for human or animal implantation as they're not sanitized. How did you convince a piercing shop to do this for you? How did they prepare the ampoule? Are they autoclaveable?

It's a 40Gbps connection, not 40GBps. That wou...

2010-03-21T02:30:03.602-07:00

It's a 40Gbps connection, not 40GBps. That would make it capable of 5GBps.

So it IS a typo, and you DIDN'T check.

Also, this is OLD news.

http://www.thelocal.se/7869/20070712/

If you are looking for a hitag, go here. http://ww...

2010-01-20T16:47:11.342-08:00

If you are looking for a hitag, go here. http://www.sleepallday.org/

I used a Trossen as well, the 13X3 has better range, and you need every mm you can get with an implant.

Its an EM4102 I got from Trossen Robotics, (www.tr...

2010-01-15T08:12:02.174-08:00

Its an EM4102 I got from Trossen Robotics,
(www.trossenrobotics.com)

@Mr sayao: No the tag does not show through at all. That pic is just to show where the tag was inside my hand.

For read/write, you might want to look into the HITAG 2048 (google it).

I need to find a way to get my ignition attached to that rocker switch now... I had it done before, but the wires got super hot... I think I need smaller gauge wires.

Id like to second Jason's comment, what type o...

2010-01-14T20:51:44.711-08:00

Id like to second Jason's comment, what type of tag did you use and where did you get it from?

You could use a relay and make the red switch also...

2010-01-14T19:28:20.614-08:00

You could use a relay and make the red switch also throw the ignition therefore it is only one switch

What kind of tag did you go for? I've been thi...

2010-01-14T12:51:51.671-08:00

What kind of tag did you go for? I've been thinking about doing this, and I have some 4002 capsules but I'd kinda prefer something read/write.

hey does the tag show through like in the last pic...

2010-01-14T12:35:14.915-08:00

hey does the tag show through like in the last picture?

Just go ahead and have it implanted. The Mark of ...

2009-12-15T11:25:40.802-08:00

Just go ahead and have it implanted. The Mark of the Beast won't be a chip. How do I know? I'm a retired banker, and bankers will be responsible for implementing the Mark, when it becomes mandatory and the only way to pay. In that situation, bankers will insist that there be a manual backup option for when the power fails, for places where there's no power at all, and for the case that a scanner doesn't pick up a chip that's there but just stopped working. A chip doesn't have that backup option.

Read my free e-book Walkabout: The History of a Brief Century for the complete story!

helping to spark the rise of turntablism is a stik...

2009-10-02T09:54:45.283-07:00

helping to spark the rise of turntablism is a stike against it ,i.m.o

helping to spark the rise of turntablism is a stik...

2009-10-02T09:53:50.876-07:00

helping to spark the rise of turntablism is a stike against it ,i.m.o

Wonderful post, funny blog, nice gps... but leave...

2009-09-18T05:21:28.378-07:00

Wonderful post, funny blog, nice gps...

but leave Herbie Hancock out of it...

"Rockit" was perhaps the first popular single to feature scratching and other turntablist techniques, performed by GrandMixer D.ST - an influential DJ in the early years of turntablism - using turntables as a musical instrument. Later turntablists, such as DJ Qbert and Mix Master Mike, cited "Rockit" as revelatory in the documentary film Scratch, inspiring their interest in the instrument.
-http://en.wikipedia.org/wiki/Rockit

That's really cool :) I've got a Garmin N...

2009-09-17T10:17:14.883-07:00

That's really cool :)

I've got a Garmin Nuvi and now I know what's inside one. Fitting it into my car would be a fun exercise but I'm a tad bothered someone might break in to steal it.

nice!!

2009-04-25T13:14:00.000-07:00

nice!!

I just started spore on my AA1 with the default XP...

2008-12-16T06:22:00.000-08:00

I just started spore on my AA1 with the default XP install and 1 gig of RAM - so far it's decent but not great, doesn't seem as responsive as yours - how did it perform in the later parts of the game? any chance you could do a more complete review of spore performance on the AA1?

For Guild Wars Cheats, Guild Wars Dupes, GW gold cheats, Guild Wars Bots, Guild Wars Guides, and Walkthroughs click here

hello,

nice idea for playing old games ;)
2008-09-02T17:44:00.000-07:00
hello,

nice idea for playing old games ;)

the sound works ?

i would be interested in know how did you set up t...

2008-09-01T03:34:00.000-07:00

i would be interested in know how did you set up the screen resolution and also the wireless card, if possible

Techno-holics

It’s a nice concept. I can definitely build a bot ...

yeah the sketch would great to share.

Just use a project box with two prongs. Did it in ...

Where is the video showing how it works on people?...

I would love to try and make these. Are there more...

@Ett Well an internet speed connection is given i...

Can you share the arduino sketch?

Trossen has a disclaimer at the bottom of their pa...

It's a 40Gbps connection, not 40GBps. That wou...

If you are looking for a hitag, go here. http://ww...

Its an EM4102 I got from Trossen Robotics, (www.tr...

Id like to second Jason's comment, what type o...

You could use a relay and make the red switch also...

What kind of tag did you go for? I've been thi...

hey does the tag show through like in the last pic...

Just go ahead and have it implanted. The Mark of ...

helping to spark the rise of turntablism is a stik...

helping to spark the rise of turntablism is a stik...

Wonderful post, funny blog, nice gps... but leave...

That's really cool :) I've got a Garmin N...

nice!!

I just started spore on my AA1 with the default XP...

For Guild Wars Cheats, Guild Wars Dupes, GW gold cheats, Guild Wars Bots, Guild Wars Guides, and Walkthroughs click here

hello,nice idea for playing old games ;) 2008-09-02T17:44:00.000-07:00 hello,nice idea for playing old games ;)the sound works ?

i would be interested in know how did you set up t...

hello,

nice idea for playing old games ;)
2008-09-02T17:44:00.000-07:00
hello,

nice idea for playing old games ;)

the sound works ?